Dell Alienware 15 (Early 2015) - Manual (Page 128)

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Slide the power-adapter port into the slot on the computer base.
2 Align the screw holes on the power-adapter port bracket with the screw
holes on the power-adapter port.
3 Replace the screws that secure the power-adapter port bracket to the
computer base.
4 Route the power-adapter port cable through the routing guides on the
computer base.
Post-requisites
1 Follow the procedure from step 4 to step 11 in “Replacing the system
board ".
2 Replace the display assembly .
3 Replace the I/O board .
4 Replace the hinge covers .
5 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
6 Replace the wireless card .
7 Replace the solid-state drives .
8 Replace the memory modules .
9 Replace the base panel .
128