Replacing the logo board, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 113: Logo board
Advertising
Replacing the logo board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Adhere the logo board to the display bezel.
2 Turn the display bezel over.
Post-requisites
1
Follow the procedure from step 2 to step 5 in “Replacing the
”.
2 Replace the
3 Replace the
.
4 Follow the procedure from step 5 to step 11 in “Replacing the
”.
5 Replace the
6 Replace the
7 Replace the
.
8 Replace the
.
113
Advertising