Dell Brocade Adapters - Manual (Page 133)

Brocade Adapters Troubleshooting Guide 109
53-1002145-01
Adapter properties
3
Displaying Persistent Binding settings through BCU
Use the pbind --list BCU command to query the list of mappings for persistent binding on a specific
port.
pbind --list <port_id> <pwwn>
where:
port_id ID of the port for which you want to display settings.
pwwn Port World Wide Name
Displaying Persistent Binding settings through HCM
Launch the Persistent Binding dialog box as follows to determine SCSI target ID mappings:
1. Launch the HCM.
2. Select an adapter, host, DCB port, or FCoE port from the device tree.
3. Launch
4. Select Configure > Persistent Binding. > View Persistent Binding.
Adapter properties
Display properties for the following using HCM:
• CNAs or Fabric Adapter ports configured in CNA mode.
• HBAs or Fabric Adapter ports configured in HBA mode.
CNA Properties
Following are the some of the properties that you can display for CNAs or Fabric Adapter ports
configured in CNA mode:
• MAC address
• Adapter name
• Operating status
• Vendor ID
• PCIe generation
• Subsystem vendor ID
• Serial number
• Manufacturer
• Model description
• Maximum speed supported
• Number of ports
• OEM information
• Card type