Dell Brocade Adapters - Manual (Page 152)

128 Brocade Adapters Troubleshooting Guide
53-1002145-01
HCM and Installer Message Reference
B
All statistics data
displayed here will be
lost if you do not save
them. Do you want to
proceed? Occurs when the user closes the any Statistics
dialog box. Information message.
Are you sure you wish to
clear the selected
Name(s)? Occurs when the user deletes the names in
Configure Names using the Remove option. Select Yes to delete the selected
name and no, to not delete the
selected name.
Authentication failed. Occurs when adapter’s authentication policy
(CHAP secret, group, or algorithm) does not
match with switch's authentication policy. Enter the same authentication
policy as the switch.
Backup data failed.
<Runtime Reason> Occurs when user tries to back up the data and
the process of backup failed. Error message. Backup failed in
Runtime.
Backup data
successfully completed. Occurs when the data backup successfully
completes. Information message.
Backup of VLAN and
Team configurations is
successful. Occurs when the user clicks on the Backup
VLAN and Team menu item in Tool menu. Information message.
Backup of VLAN and
Team configurations is
failed. <Runtime
Reason> Occurs when the user clicks on the Backup
VLAN and Team menu item in Tool menu. Error message. Backup failed in
Runtime.
Backup is in progress.
Please wait. Occurs when the user initiates a backup
operation using HCM Backup dialog box.
Beaconing operation
failed Occurs in many cases. One case is if the user
performs beaconing operation for a disabled
port, the message “Port is not online
Beaconing operation failed” displays. Beacon port and beacon link for
valid ports.
Boot image update is in
progress. Do not close
the dialog. Occurs when user clicks the 'X' button in the
Update Boot Image dialog box while the boot
image update is in progress. Information message.
Cannot connect to the
server. Update failed. Occurs when the user attempts operation in
Basic Port Configuration, Advanced Port
Configuration, or a Reset operation in a
Statistics dialog box when the agent is not
running. Check if agent is still running.
Cannot get Teaming
statistics for this host. No
Teaming configured. Occurs when the user launches the Teaming
Statistics dialog box when there are no teams
configured in the host. Error message. Teams must be
configured before using this dialog
box.
Cannot find the adapter.
Try again later. Occurs when user enables or disables the
adapter in the following scenario.
1
HCM discovers the adapter and places it
into the product tree.
2 Another user removes the adapter before
the next discovery.
3 User now tries to enable/disable the
adapter.
Refresh the product tree and check
if the adapter is still available.
TABLE 14 Host Connectivity Manager messages (continued)
Message Cause Corrective Action or Notes