Dell Brocade Adapters - Manual (Page 157)

Brocade Adapters Troubleshooting Guide 133
53-1002145-01
HCM and Installer Message Reference
B
Restore data is
successfully completed.
Please restart HCM for
new data to take effect. Occurs upon successful restore of backed-up
HCM data. Information message.
Select a valid driver file. Occurs when driver file field is left blank. Select the appropriate driver file.
Selected driver file
version {0} is not
supported. Occurs when the selected driver version is not
supported. Use a supported driver.
Starting the driver
update… Occurs when the driver update starts. Information message.
Successfully updated the
parameters for all ports. Occurs when the configurations done in the
Basic Port Configuration dialog box are
successfully updated using the Apply button. The configuration will be reflected
only after a successful process.
Syslog configuration
failed Occurs when the user tries to configure a
syslog server using the Syslog Server
Configuration dialog box. Retry the operation.
System reboot is
required for the newer
driver to take effect Occurs when the driver update is complete. A
system reboot is required for the new driver to
take effect. Information message.
Team name should start
with an alphabet.
Allowed characters are
0-9, A-Z, a-z, hyphen (-)
and underscore (_) and
should not exceed 31
characters. Occurs when the user provides an invalid team
name. Make sure the team name starts
with a letter. Allowable characters in
the team name are 0-9, A-Z, a-z,
hyphen (-) and underscore (_).
The adapter will be
disabled for executing
the Memory test. This
will also disable all the
ports and their devices
on the adapter. Are you
sure you want to
continue? Occurs when the user selects the Memory test
in the Hardware Tests Diagnostics dialog box. Click OK to proceed or Cancel to
cancel the operation.
The boot image update
failed: <Runtime
Reason> Occurs when a invalid boot code image file is
updated. Select a valid boot image file for the
boot image update.
The boot image
successfully updated.
You must reboot the
system for the updated
image to be effective. Occurs when the boot code image is updated
successfully. After successful boot image update,
reboot the system.
The change has not been
sent to device. Do you
want to commit the
change? Occurs when user clicks on OK in the Basic
Port Configuration dialog box after making
configuration changes. Select to commit the change or to
not commit the change.
TABLE 14 Host Connectivity Manager messages (continued)
Message Cause Corrective Action or Notes