Dell Brocade Adapters - Manual (Page 23)

Brocade Adapters Troubleshooting Guide xxiii
53-1002145-01
The Ethernet MAC address is used for normal Ethernet operations. To find this MAC address
using HCM, select an Ethernet port in the HCM device tree, then click the Properties tab in the
right pane to display the port Properties panel. Look for the Current MAC address and Factory
MAC address fields.
Each enode logging in to the fabric through a local adapter port is assigned a MAC address
during FCoE Initialization Protocol (FIP) operations. This MAC is assigned for the current FCoE
communication only. To find this MAC address, perform one of the following tasks:
• Select an FCoE port in the HCM device tree, then click the Properties tab in the right
pane to display the port Properties panel. Look for the FCoE MAC field.
• Enter the port --query port_id BCU command. Look for the FCoE MAC.
NOTE
MAC addresses assigned during FCoE initialization operations cannot be changed using device
management applications.
The FCoE Forwarder (FCF) MAC address is the address of the attached FCoE switch. Select an
FCoE port in the HCM device tree, then click the Properties tab in the right pane to display the
port Properties panel. Look for the FCF MAC field.
You can also determine port MAC addresses using the following BCU commands:
NOTE
For details on using HCM and BCU commands, refer to the Brocade Adapters
Administrator’s Guide.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
[email protected]
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
Command Function
port ---query port_id Displays port information, including the MAC
addresses. The <port_id> parameter is the
port number.
port ---list Lists all the physical ports on the adapter along
with their Ethernet and FCoE MAC addresses.