Dell POWEREDGE M1000E - Manual (Page 50)

30 Fabric Watch Administrator’s Guide
53-1002752-01
Fabric Watch configuration tasks
5
Set the following parameters for port
monitoring:
•
Port type
•
Area type
•
Time base
•
Threshold level
•
Trigger (boundary level)
•
Action (notification type)
•
Buffer
•
Port fencing
portThConfig
portFencing “Port Monitoring” on page 55
Set the port persistence time fwSet --port -persistence “Setting the port persistence time” on
page 69
Configure port fencing portFencing “Port fencing” on page 69
Set the following parameters for system
monitoring:
•
Class
•
Area type
•
Threshold level
•
Trigger (boundary level)
•
Action (notification type)
•
Buffer
sysMonitor “System monitoring using the
sysMonitor command”
on page 78.
Set and display the switch status policy
parameters. switchStatusPolicySet
switchStatusPolicyShow “System Monitoring” on page 75
Show the overall switch status. switchStatusShow Chapter 8, “System Monitoring”
Configure FRU state and notifications, and
monitor power supply, fan, and SFP FRUs. fwFruCfg Chapter 8, “System Monitoring” .
Display fan status fanShow Chapter 8, “System Monitoring”
Show sensor readings sensorShow Chapter 8, “System Monitoring”
Show switch temperature readings tempShow Chapter 8, “System Monitoring”
Create a detailed port report. fwPortDetailShow “Generating a Port Detail report” on
page 101.
Show the availability of monitor
information. fwSamShow “Switch Availability Monitor report” on
page 98.
TABLE 2 Fabric Watch configuration tasks (Continued)
Configuration task Command Location of procedure