Dell POWEREDGE M1000E - Manual (Page 72)

52 Fabric Watch Administrator’s Guide
53-1002752-01
Recommended settings for Fabric, SFP, Performance, Security classes
6
Recommended settings for Fabric, SFP, Performance,
Security classes
Table 14 lists the recommended settings for the Fabric, SFP, Security, and Performance classes
discussed in this chapter. For all of these classes, it is recommended that you use the default
settings.
TABLE 14 Recommended settings for Fabric, SFP, Performance, and Security classes
E=Error_Log, S=SNMP_Trap,
P=Port_LOG_LOCK,
M=EMAIL_ALERT, F=Port Fence
Trait Configuration
Cl
as
s
Area
Default Custom
Unit
Time Base Low Thresh Hi
gh Thr
es
h
Buf
fer
Default Custom
Be
low
Above No
tes
Fabric E_Port downs X Downs None 0 0 0 X
Fabric reconfig X Reconfigs None 0 0 0 X
Domain ID
changes X DID changes None 0 0 0 X
Segmentation X Segmentations None 0 0 0 X
Zone changes X Zone changes None 0 0 0 X
Fabric logins X Logins None 0 0 0 X
SFP Temperature X C None -10 85 3 X E E
RX power (RXP) X uWatts None 0 5000 25 X E E
TX power (TXP) X uWatts None 0 5000 25 X E E
Current X mA None 0 50 1 X E E
Voltage X uV None 2970 3630 10 X E E
PWR on Hours X Changes None 0 0 0 X
End-to-End
Performance RX performance X KB/s None 0 0 0 X
TX performance X KB/s None 0 0 0 X
Filter-based
Performance Custom filter
counter X Frames None 0 0 0 X