Dell POWEREDGE M1000E - Manual (Page 87)

Fabric Watch Administrator’s Guide 67
53-1002752-01
portThConfig command procedures
7
State changes (ST) Monitors state
changes. Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0 Below: 0
Above: 0 Informative
Out_of_range
Transmitted packets
(TXP) Monitors the
transmit rate, by
percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Trunk utilization
(E_Port, FCU_Port,
and FOP_Port) The percent of
utilization for the
trunk at the time of
the last poll. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0 Below: 0
Above: 0 Informative
Informative
Link reset Monitors the
number of link
resets sent by a
given port (LR-Out)
and received on a
given port (LR-In). Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50 Below: 0
Above: 0 Informative
Out_of_range
TABLE 18 FOP_Port and FCU_Port class default settings (Continued)
Area Description Default threshold
settings Default alarm settings Threshold state