Configuring the boot device – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual

Page 76

Advertising
background image

Configuring the Boot Device

If you plan to boot the system from a hard drive, the drive must be attached to the primary (or boot) controller. The device

that the system boots from is determined by the boot order specified in the System Setup program.

The System Setup program provides options that the system uses to scan for installed boot devices. See your system's User's

Guide for information about the System Setup program.

NOTE:

It is recommended that you do not change the default boot order.

Back to Contents Page

Advertising
See also other documents in the category Dell Computer hardware: