System board connectors, Table a-1 – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 91
Advertising
Table A-1. System Board Jumper Settings
Jumper
Setting
Description
PASSWD
(default)
The password feature is enabled.
The password feature is disabled.
NVRAM_CLR
(default)
The configuration settings are retained at system boot.
The configuration settings are cleared at next system boot. (If the configuration settings become
corrupted to the point where the system will not boot, install the jumper and boot the system.
Remove the jumper before restoring the configuration information.)
SPARE
—
To store a spare, unused jumper.
NOTE:
For the full name of an abbreviation or acronym used in this table, see "
System Board Connectors
for the location and description of system board connectors.
Figure A-3. System Board Connectors
Advertising