Dell Latitude LM - Manual (Page 62)

4-6 Dell Latitude LM Reference and Troubleshooting Guide
Run Under Subtest
RUN in the Subtest menu displays five options: ONE ,
SELECTED , ALL , KEY-HELP , and QUIT MENU . If you select
ONE , only the highlighted subtest is run. If you choose
SELECTED , only the selected subtests are run. If you
select ALL , every subtest in the selected test group are
run. (The subtests are sun in the order they are listed.)
The KEY-HELP option displays a list of available key controls.
The QUIT MENU option returns you to the previous menu.
Select Under Subtest
SELECT in the Subtest menu allows you to select individ-
ual subtests to tailor the testing process to your particular
needs. You can choose one or more subtests from the list.
When you choose
SELECT , five options are displayed:
ALL , ONE , CLEAR ALL , KEY-HELP , and QUIT MENU .
To select all the test groups, highlight ALL in the Select
menu, and then press < ENTER >. To select an individual
subtest, either highlight the subtest and press the
<
SPACEBAR > or highlight ONE and press < ENTER >.
To reverse a subtest selection, highlight the subtest and
press the <
SPACEBAR >. To clear all selected subtests, select
CLEAR ALL .
The KEY-HELP option displays a list of available key controls.
The QUIT MENU option returns you to the previous menu.
Options Under Subtest
The OPTIONS option in the Subtest menu functions in the
same manner as the OPTIONS option in the Main menu. For
information on this option, see “Options” found later in this
section.
Test Limits Under Subtest
The TEST LIMITS option in the Subtest menu functions in the
same manner as the TEST LIMITS option in the Main menu. For
information on this option, see “Test Limits” found later in this
section.
About Under Subtest
The ABOUT option in the Subtest menu displays information
about the highlighted subtest, such as its limits and parameters
and how to set them.
Key-Help Under Subtest
The KEY-HELP option in the Subtest menu displays a list of
available key controls.
Quit Menu Under Subtest
The QUIT MENU option in the Subtest menu returns you to the
Main menu.
Options
Table 4-1 lists all of the possible values for each global
parameter of
OPTIONS . A brief description of each
parameter follows the table. To select a parameter, press
the up- or down-arrow key. To change the values within
fields, use the left- or right-arrow key, the <
SPACEBAR >
key, or the plus (+) and minus (–) keys. If the value
within a field is numeric, you can type in the number. (If
you make a mistake, type in zeros until the field is filled
with zeros and then start again.)