Dell PowerEdge T410 - Manual (Page 32)

32
About Your System
E1420 CPU Bus parity
error. Power
cycle AC.
The system BIOS has
reported a processor bus
parity error. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
E1422 CPU # machine
check error.
Power cycle
AC.
The system BIOS has
reported a machine check
error. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
E1610 Power Supply #
(### W)
missing. Check
power supply.
Specified power supply
was removed or is missing
from the system. See "Troubleshooting
Power Supplies" on
page 161.
E1614 Power Supply #
(### W) error.
Check power
supply.
Specified power supply
has failed. See "Troubleshooting
Power Supplies" on
page 161.
E1618 Predictive
failure on
Power Supply #
(### W). Check
PSU.
An over-temperature
condition or power supply
communication error has
caused the predictive
warning of an impending
power supply failure. See "Troubleshooting
Power Supplies" on
page 161.
E161C Power Supply #
(### W) lost
AC power.
Check PSU
cables.
Specified power supply is
attached to the system,
but it has lost its AC
input. Check the AC power
source for the specified
power supply. If the
problem persists, see
"Troubleshooting Power
Supplies" on page 161.
Table 1-2. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 32 Tuesday, June 9, 2009 4:09 PM