Dell PowerEdge T410 User Manual
Page 54
54
About Your System
Time-of-day not
set - please run
SETUP program
Incorrect Time or Date
settings; faulty system
battery.
Check the Time and Date
settings. See "Using the
System Setup Program and
UEFI Boot Manager" on
page 61. If the problem
persists, replace the system
battery. See "System Battery"
on page 139.
Timer chip
counter 2 failed
Faulty system board.
See "Getting Help" on
page 185.
TPM
configuration
operation
honored. System
will now reset.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
Information only.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
Enter I or M to proceed.
TPM failure
A Trusted Platform Module
(TPM) function has failed.
See "Getting Help" on
page 185.
Table 1-3.
System Messages (continued)
Message
Causes
Corrective Actions
book.book Page 54 Tuesday, June 9, 2009 4:09 PM