Front bezel, Removing the front bezel – Dell PowerEdge T410 User Manual

Page 85

Advertising
background image

Installing System Components

85

Front Bezel

NOTE:

If you are removing or installing a hot-swappable hard drive, the system may

remain turned on and in the upright position during removal of the front bezel. If you
are removing or installing any other system component(s), the system should be
turned off and placed in the orientation shown in Figure 3-1.

Removing the Front Bezel

1 Using the system key, unlock the front bezel (if locked).
2 Slide the release latch in the direction of the arrow and rotate the top end

of the bezel away from the chassis.

3 Lift the bezel away from the chassis.

1

system cover

2

cooling shroud

3

PCIe expansion card slots (5)

4

system fan

5

power supply bay

6

heatsink and processor (1 or 2)

7

SAS backplane

8

system feet (4)

9

SAS or SATA hard drives (up to 6)

10

control panel

11

tape drive (optional)

12

optical drive (optional)

13

chassis intrusion switch

14

RAID battery (optional)

15

expansion card stabilizer

book.book Page 85 Tuesday, June 9, 2009 4:09 PM

Advertising