Dell PowerEdge T410 - Manual (Page 67)

Using the System Setup Program and UEFI Boot Manager
67
SATA Settings Screen
Execute Disable
(Enabled default) Enables or disables execute disable memory protection
technology.
Number of Cores per
Processor
(All default) If set to All, the maximum number of cores in each
processor is enabled.
Turbo Mode
(Enabled default) If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
C States
(Enabled default) When set to Enabled, the processor(s) can operate in all
available power states
Processor 1 Family -Model-
Stepping Displays the family, model and stepping of the selected
processor
Option Description
SATA Controller ATA Mode enables the integrated SATA controller. Off
disables the controller.
Port A
(Auto default) Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Port B
(Off default) Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Port C
(Off default) Auto enables BIOS support for the device attached to
SATA port C. Off disables BIOS support for the device.
Port D
(Off default) Auto enables BIOS support for the device attached to
SATA port D. Off disables BIOS support for the device.
Port E Auto enables BIOS support for the device attached to
SATA port E. Off disables BIOS support for the device.
Port F Auto enables BIOS support for the device attached to
SATA port F. Off disables BIOS support for the device.
Option Description
book.book Page 67 Tuesday, June 9, 2009 4:09 PM