Dell Vostro 200 (Mid 2007) - Manual (Page 111)

Removing and Installing Parts
111
DC Power Connector P7
Memory
You can increase your computer memory by installing memory modules on
the system board. Your computer supports DDR2 memory. For additional
information on the type of memory supported by your computer, see
"Memory" on page 169.
NOTICE:
Do not install ECC or buffered memory modules. Only unbuffered, non-
ECC memory is supported.
Pin Number Signal Name 22-AWG Wire
1 +5 VDC Red
2 GND Black
3 GND Black
4 +12 VADC Yellow
book.book Page 111 Thursday, June 14, 2007 6:23 PM