Dell Vostro 200 (Mid 2007) - Manual (Page 135)

Removing and Installing Parts
135
4 Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you have installed a PCI Express x16 card, this card may cover the floppy
drive connectors. Remove this card before disconnecting the floppy-drive cables
(see "Removing a PCI/PCI Express Card " on page 121 ).
5 Disconnect the data cable from the system board.
6 Remove the two screws securing the floppy drive.
7 Slide the floppy drive out through the front of the computer.
1 floppy drive 2 data cable 3 power cable
4 system board
connector 5 screws (2)
2
4
3
1
5
book.book Page 135 Thursday, June 14, 2007 6:23 PM