Boot sequence – Dell Vostro 200 (Mid 2007) User Manual
Page 178
178
Appendix
Boot Sequence
This feature allows you to change the boot sequence for devices.
Option Settings
•
Diskette Drive — The computer attempts to boot from the floppy drive. If
the floppy disk in the drive is not bootable, if no floppy disk is in the drive,
or if there is no floppy drive installed in the computer, the computer
generates an error message.
•
Hard Drive — The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
•
CD Drive — The computer attempts to boot from the CD drive. If no CD
is in the drive, or if the CD has no operating system, the computer
generates an error message.
Onboard LAN Boot
ROM
Enabled or Disabled (Disabled by default)
SATA Mode
IDE; RAID; AHCI (IDE by default)
Power Management Setup
ACPI Suspend Type
S1(POS); S3(STR) (S3(STR) by default)
Quick Resume
Disabled; Enabled (Disabled by default)
Remote Wake Up
On; Off (On by default)
USB KB Wake-Up
From S3
Enabled; Disabled (Disabled by default)
Auto Power On
Enabled; Disabled (Disabled by default)
Auto Power On Date
0
Auto Power On Time
0:00:00
AC Recovery
Off; On; Former-Sts (Off by default)
book.book Page 178 Thursday, June 14, 2007 6:23 PM