Dell Vostro 200 (Mid 2007) - Manual (Page 148)

148
Removing and Installing Parts
10 Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
11 Replace and tighten the two screws securing the optical drive.
12 Replace the bezel (see "Replacing the Bezel" on page 125).
13 Replace the computer cover (see "Replacing the Computer Cover" on
page 166).
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 optical drive 2 second optical drive 3 data cable
4 power cable 5 system board
connector 6 screw holes in the
optical drive bay (2)
1
2
3
4
5
6
book.book Page 148 Thursday, June 14, 2007 6:23 PM