Media card reader – Dell Vostro 200 (Mid 2007) User Manual
Page 140
Advertising
140
Removing and Installing Parts
Media Card Reader
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
Removing a Media Card Reader
1 Follow the procedures in "Before You Begin" on page 101.
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the bezel (see "Removing the Bezel" on page 123).
1
Media Card Reader
2
data cable
3
power cable
4
system board connector
5
screws (2)
*1
2
4
3
5
*
Not present on all computers.
book.book Page 140 Thursday, June 14, 2007 6:23 PM
Advertising