Dell Vostro 200 (Mid 2007) - Manual (Page 146)

146
Removing and Installing Parts
9 Replace the bezel (see "Replacing the Bezel" on page 125).
10 Replace the computer cover (see "Replacing the Computer Cover" on
page 166).
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
11 Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
1 optical drive 2 data cable 3 power cable
4 system board
connector 5 screw holes in the
optical drive bay (2) 6 screws (2)
1
2
4
3
6
5
book.book Page 146 Thursday, June 14, 2007 6:23 PM