Dell Vostro 200 (Mid 2007) User Manual
Page 117
Removing and Installing Parts
117
3 Remove the screw holding the card retention bracket.
4 Lift the card retention bracket and set it aside in a secure place.
5 If you are installing a new card, align the tip of a Phillips screwdriver with
the slot on the break-away metal plate and rotate the screwdriver outwards
to break the metal plate.
6 If you are replacing a card that is already installed in the computer, remove
the card.
If necessary, disconnect any cables connected to the card.
•
For PCI card, grasp the card by its top corners, and ease it out of its
connector.
•
For PCI Express card, pull the securing tab, grasp the card by its top
corners, and then ease it out of its connector.
NOTE:
The position of the card you are replacing may vary from the illustration.
1
card retention bracket
2
screw
2
1
book.book Page 117 Thursday, June 14, 2007 6:23 PM