Dell Vostro 200 (Mid 2007) - Manual (Page 70)

70
Solving Problems
Media Card Reader Problems
N O DRIVE LETTER IS ASSIGNED —
When Windows detects the Media Card Reader, the device is automatically
assigned a drive letter as the next logical drive after all other physical drives in the
system. If the next logical drive after the physical drives is mapped to a network
drive, Windows does not automatically assign a drive letter to the Media Card
Reader.
To manually assign a drive for the Media Card Reader:
Windows XP
1 Click Start, right-click My Computer, then select Manage.
2 Select the Disk Management option.
3 Right-click the corresponding drive letter in the right pane that needs to be
changed.
4 Select Drive Letter and Paths.
5 From the drop-down list, select the new drive letter assignment for the Media Card
Reader.
6 Click OK to confirm your selection.
Windows Vista
1 Click Start , right-click Computer, and select Manage.
2 Click Continue if prompted.
3 Click Expand the Storage object and select Disk Management.
4 Right-click the corresponding drive letter in the right pane that needs to be
changed.
5 Select Change Drive Letter and Paths.
6 Click Change.
7 From the drop-down list, select the new drive letter assignment for the Media Card
Reader.
8 Click OK to confirm your selection.
NOTE:
You must be logged in with Administrator privileges to perform this procedure.
NOTE:
The Media Card Reader only appears as a mapped drive when it is connected.
Each of the four Media Card Reader slots are mapped to a drive even if no media is
installed. If you attempt to access the Media Card Reader when no media is inserted,
you are prompted to insert media.
book.book Page 70 Thursday, June 14, 2007 6:23 PM