Installing the processor fan/heat sink assembly – Dell Vostro 200 (Mid 2007) User Manual
Page 157
Removing and Installing Parts
157
NOTE:
The processor fan/heat sink assembly in your computer may vary from the
one shown in the illustration.
Installing the Processor Fan/Heat Sink Assembly
NOTICE:
When reinstalling the fan, ensure that you do not pinch the wires that run
between the system board and the fan.
1 Align the captive screws on the processor fan/heat sink assembly to the
four metal screwhole projections on the system board.
NOTE:
The processor fan/heat sink assembly in your computer may vary from the
one shown in the illustration above.
2 Tighten the four captive screws.
NOTE:
Ensure that the processor fan/heat sink assembly is correctly seated
and secure.
3 Connect the processor fan/heat sink assembly cable to the system board
(see "System Board Components" on page 106).
1
captive screws (4)
2
processor fan/heat sink
assembly
2
1
book.book Page 157 Thursday, June 14, 2007 6:23 PM