Using the system setup program – Dell PowerEdge T105 User Manual
Page 32
32
Using the System Setup Program
Using the System Setup Program
Table 2-1 lists the keys that you use to view or change information on the
System Setup program screens, and to exit the program.
NOTE:
For most of the options, any changes that you make are recorded but do not
take effect until you restart the system.
Table 2-1.
System Setup Program Navigation Keys
Keys
Action
Tab or <Shift><Tab>
Cycles cursor up and down.
Down arrow or Up arrow
Moves cursor up and down.
Spacebar, <+>,<–>, left
and right arrow
Cycles through the settings in a field. In many fields,
you can also type the appropriate value.
<Enter>
Allows you to open a window, edit the date and time,
or confirm your setting change and move the cursor
back to the option menu
<Esc>
Displays three options:
• Save changes and Exit
• Discard changes and Exit
• Opens the System Setup
Exit screen
<F1>
Displays the System Setup program
'
s help file for the
selected field.
<Alt-B>
Reboots the system.
<Alt-F>
Loads the defaults for all fields.
<Alt-D>
Loads the default for the selected field.
<Alt-R>
Restores original values.
<Alt-X>
Exits the operating system without saving.
Ctrl-Alt-Del
Reboots without saving.
Home/End
Moves cursor to the first item or last item.
<A>
Sets SATA controller to ATA mode.
<0>
Sets SATA controller to off.
book.book Page 32 Wednesday, April 15, 2009 8:47 PM