Dell PowerEdge T105 - Manual (Page 94)

94
Installing System Components
4 Slide the chassis intrusion switch out of the securing bracket notch. See
Figure 3-28.
5 Remove the switch and its attached cable from the system.
Figure 3-28. Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1 Align the chassis intrusion switch with the securing bracket notch. See
Figure 3-28.
2 Slide the switch into the securing bracket notch.
3 Connect the switch cable to the INTRUSION connector on the system
board.
1 chassis intrusion switch 2 securing bracket notch
3 INTRUSION connector
1
2
3
book.book Page 94 Wednesday, April 15, 2009 8:47 PM