Dell PowerEdge T105 - Manual (Page 36)

36
Using the System Setup Program
CPU Information Screen
Table 2-4 lists the options and descriptions for the information fields that
appear on the CPU Information screen.
SATA Configuration Screen
Table 2-5 lists the options and descriptions for the information fields that
appear on the SATA Configuration screen.
NOTE:
When a SAS Card is installed in the system, the SATA Configuration screen
changes. The SATA controller field displays ATA Mode and will be unchoosable.
Both Port A and Port B display off and are also unchoosable. When the SAS Card is
plugged out, the SATA Configuration screen settings will be loaded to default
values.
Table 2-4. CPU Information Screen
Option Description
64-Bit Specifies if the installed processor supports AMD
®
64-bit
extensions. This option does not have user-selectable
settings.
Core Speed Displays the clock speed of the processor. This option does
not have user-selectable settings.
Bus Speed Displays the bus speed of the processor. This option does
not have user-selectable settings.
Demand-Based Power
Management When set to Enabled, the CPU Performance State Tables
are reported to the operating system. When set to
Disabled (the default), the Performance State Tables are
not reported to the operating system.
Processor 1 ID Displays the family and model number of each processor.
This option does not have user-selectable settings.
Level2 Cache Displays the amount of cache memory for the processor.
This option does not have user-selectable settings.
Number of Cores Displays the number of cores in the processor. This option
does not have user-selectable settings.
book.book Page 36 Wednesday, April 15, 2009 8:47 PM