Dell PowerEdge T105 User Manual
Page 99
Advertising
Installing System Components
99
2 Secure the I/O panel assembly by replacing the screw. See Figure 3-30.
3 Secure the I/O panel ribbon cable through the clips beneath the 3.5
optional diskette drive and on the side of the power supply shroud, and
connect the I/O panel ribbon cable to the new I/O panel connector. See
Figure 3-31.
Figure 3-31.
Cabling the I/O Panel Assembly
4 Replace the large processor cooling fan. See "Replacing the Cooling Fans"
1
I/O panel connector
2
I/O panel assembly
3
4-pin power cable to system board
4
cable clip on power supply
5
I/O panel ribbon cable
4
2
5
1
3
book.book Page 99 Wednesday, April 15, 2009 8:47 PM
Advertising