Dell PowerEdge T105 - Manual (Page 38)

38
Using the System Setup Program
System Security Screen
Table 2-7 lists the options and descriptions for the information fields that
appear on the System Security screen.
Embedded Gb NIC 1 Enables or disables the system's integrated NIC. Options
are Enabled with PXE (the default) and Disabled. PXE
support allows the system to boot from the network.
Changes take effect after the system reboots.
MAC Address Displays the MAC address for the integrated 10/100/1000
NIC. This field does not have user-selectable settings.
Serial Port Sets how the built-in serial port operates. When set to
Auto, the built-in serial port automatically remaps to the
next available port address if a duplicate port address is
installed using a serial port expansion card.
Table 2-7. System Security Screen
Option Description
System Password Displays the current status of your system's password
security feature and allows you to assign and verify a new
system password. Default is Not Enabled.
NOTE:
See "Using the System Password" on page 40 for
instructions on assigning a system password and using or
changing an existing system password.
Setup Password Restricts access to the System Setup program in the same
way that you restrict access to your system using the system
password feature. Default is Not Enabled.
NOTE:
See "Using the Setup Password" on page 42 for
instructions on assigning a setup password and using or
changing an existing setup password.
After Power Failure Determines how the system reacts when power is restored
to the system. If system is set to Last State (the default),
the system returns to the last power state. On turns on the
system after power is restored. When set to Off, the system
remains off after power is restored.
Table 2-6. Integrated Devices Screen (continued)
Option Description
book.book Page 38 Wednesday, April 15, 2009 8:47 PM