Cisco 10000 - Manual (Page 118)

3-36
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 3 Configuring Remote Access to MPLS VPN
Configuration Examples for RA to MPLS VPN
class-int vpn
!
interface ATM6/0/0
no ip address
load-interval 30
no atm pxf queuing
atm clock INTERNAL
atm sonet stm-4
no atm ilmi-keepalive
!
interface ATM6/0/0.1000 multipoint
range pvc 2/32 2/63
encapsulation aal5snap
protocol pppoe
!
class-int vpn
!
interface ATM7/0/0
no ip address
no atm ilmi-keepalive
!
interface ATM7/0/1
no ip address
no atm ilmi-keepalive
!
interface ATM7/0/2
no ip address
no atm ilmi-keepalive
!
interface ATM7/0/3
no ip address
no atm ilmi-keepalive
!
interface ATM8/0/0
no ip address
no atm ilmi-keepalive
!
interface ATM8/0/1
no ip address
no atm ilmi-keepalive
!
interface ATM8/0/2
no ip address
no atm ilmi-keepalive
!
interface ATM8/0/3
no ip address
no atm ilmi-keepalive
!
interface ATM8/0/3.100 multipoint
range pvc 2/32 2/42
encapsulation aal5snap
protocol pppoe
!
!Associates the common VRF with the interface.
interface ATM8/0/3.101 point-to-point
ip vrf forwarding common
ip address 10.22.10.1 255.255.255.0
pvc 3/32
encapsulation aal5snap
!