Cisco 10000 - Manual (Page 131)

3-49
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 3 Configuring Remote Access to MPLS VPN
Monitoring and Maintaining RBE to MPLS VPN
Caution Because debugging output is assigned high priority in the CPU process, it can render the system
unusable. For this reason, use debug commands only to troubleshoot specific problems or during
troubleshooting sessions with Cisco Systems technical support personnel. Moreover, it is best to use
debug commands during periods of lower network traffic and fewer users. Debugging during these
periods decreases the likelihood that increased debug command processing overhead will affect system
use.
Note For more information, see the “Troubleshooting DSL Access to MPLS VPN Integration” chapter in the
Troubleshooting Cisco Remote Access to MPLS VPN Integration, Release 2.0.
Router# debug ip packet Displays general IP debugging information and IP security option
(IPSO) security transactions.
Note This command is useful if the RFC 1483 PVC does not
connect.
Router# debug ip dhcp Displays information about DHCP client activities and the status
of DHCP packets.
Router# debug ip dhcp server events Reports server events, such as address assignments and database
updates.
Router# debug ip dhcp server packet Decodes DHCP receptions and transmissions.
Command Purpose