Cisco 10000 - Manual (Page 511)

A-7
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Appendix A RADIUS Attributes
Vendor-Proprietary RADIUS Attributes
199 Token-Idle Not Applicable
201 Require-Auth Not Applicable
202 Number-Sessions Not Applicable
203 Authen-Alias Not Applicable
204 Token-Expiry Not Applicable
205 Menu-Selector Not Applicable
206 Menu-Item Not Applicable
207 PW-Warntime Not Supported
208 PW-Lifetime Typically not used in DSL environment
209 IP-Direct Not Applicable
210 PPP-VJ-Slot-Comp Not Supported
211 PPP-VJ-1172 Not Supported
212 PPP-Async-Map Not Applicable
213 Third-Prompt Not Applicable
214 Send-Secret Typically not used in DSL environment
215 Receive-Secret Not Supported
216 IPX-Peer-Mode Not Applicable
217 IP-Pool-Definition Supported in Cisco IOS but not tested
on the Cisco 10000 series router.
218 Assign-IP-Pool Supported in Cisco IOS but not tested
on the Cisco 10000 series router.
219 FR-Direct Not Applicable
220 FR-Direct-Profile Not Applicable
221 FR-Direct-DLCI Not Applicable
222 Handle-IPX Not Applicable
223 Netware-Timeout Not Applicable
224 IPX-Alias Not Applicable
225 Metric Not Applicable
226 PRI-Number-Type Not Applicable
227 Dial-Number Not Applicable
228 Route-IP Supported in Cisco IOS but not tested
on the Cisco 10000 series router.
229 Route-IPX Not Applicable
230 Bridge Not Applicable
231 Send-Auth Not Applicable
232 Send-Passwd Not Applicable
233 Link-Compression Not Supported
Table A-2 Vendor-Proprietary RADIUS Attributes (continued)
Number Vendor-Proprietary Attribute Status