Cisco 10000 - Manual (Page 509)

A-5
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Appendix A RADIUS Attributes
Vendor-Proprietary RADIUS Attributes
127 Tunneling-Protocol Not Applicable
128 Shared-Profile-Enable Not Applicable
129 Primary-Home-Agent Not Applicable
130 Secondary-Home-Agent Not Applicable
131 Dialout-Allowed Not Applicable
133 BACP-Enable Not Applicable
134 DHCP-Maximum-Leases Not Applicable
135 Primary-DNS-Server Supported and tested
136 Secondary-DNS-Server Supported and tested
137 Client-Assign-DNS Not Applicable
138 User-Acct-Type Not Applicable
139 User-Acct-Host Not Applicable
140 User-Acct-Port Not Applicable
141 User-Acct-Key Not Applicable
142 User-Acct-Base Not Applicable
143 User-Acct-Time Not Applicable
144 Assign-IP-Client Not Applicable
145 Assign-IP-Server Not Applicable
146 Assign-IP-Global-Pool Not Applicable
147 DHCP-Reply Not Applicable
148 DHCP-Pool-Number Not Applicable
149 Expect-Callback Not Applicable
150 Event-Type Not Applicable
151 Session-Svr-Key Supported and tested. Enables the
router to match a user session with a
client request to disconnect the session.
152 Multicast-Rate-Limit Not Applicable
153 IF-Netmask Not Applicable
154 Remote-Addr Not Applicable
155 Multicast-Client Not Applicable
156 FR-Circuit-Name Not Applicable
157 FR-LinkUp Not Applicable
158 FR-Nailed-Grp Not Applicable
159 FR-Type Not Applicable
160 FR-Link-Mgt Not Applicable
161 FR-N391 Not Applicable
162 FR-DCE-N392 Not Applicable
Table A-2 Vendor-Proprietary RADIUS Attributes (continued)
Number Vendor-Proprietary Attribute Status