Cisco 10000 User Manual
Page 205
5-41
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 5 Configuring the Layer 2 Tunnel Protocol Access Concentrator and Network Server
L2TP Network Server
Acct-Status-Type = Tunnel-Stop
Acct-Delay-Time = 0
Acct-Input-Octets = 108276
Acct-Output-Octets = 65986
Acct-Session-Id = 00000B3D
Acct-Authentic = RADIUS
Acct-Session-Time = 57
Acct-Input-Packets = 2578
Acct-Output-Packets = 2823
Acct-Terminate-Cause = NAS Error
Acct-Multi-Session-Id = 00000B3D
Tunnel-Client-Auth-ID_tag0 = LAC1
Tunnel-Server-Auth-ID_tag0 = LNS1
Ascend-Connect-Progress = Call-Up
Acct-Tunnel-Connection = 63708/13441
Ascend-Disconnect-Cause = No-Reason
Acct-Tunnel-Packets-Lost = 0
Ascend-Pre-Output-Octets = 0
Ascend-Pre-Output-Packets = 0
For more information about the RADIUS tunnel accounting attributes or the Acct-Status-Type values
that support RADIUS tunnel accounting, see RFC 2867, RADIUS Accounting Modifications for Tunnel
Protocol Support.
For information about RADIUS accounting attributes supported on the Cisco 10000 series router, see
Appendix A, “RADIUS Attributes”
.
For information about RADIUS attributes, see the “RADIUS Attributes” appendix in the
Cisco IOS Security Configuration Guide, Release 12.2.
For more information on configuring RADIUS, see your RADIUS user documentation.
Configuring Optional RADIUS Tunnel Accounting Features
To configure RADIUS tunnel accounting, you can also perform any of the following optional
configuration tasks:
•
Suppressing Generation of Accounting Records for Null Username Sessions
•
Generating Interim Accounting Records
•
Generating Accounting Records for Failed Login or Session
•
Specifying Accounting NETWORK-Stop Records Before EXEC-Stop Records
•
Configuring AAA Resource Failure Stop Accounting
•
Configuring AAA Resource Accounting for Start-Stop Records
•
Configuring AAA Broadcast Accounting
•
Configuring AAA Resource Failure Stop Accounting
•
Configuring AAA Session MIB
•
Monitoring Accounting
•
Troubleshooting Accounting
Note
For more information, see the “Configuring Accounting” chapter in the Cisco IOS Security
Configuration Guide, Release 12.2.