Dell Precision M6300 (Late 2007) - Manual (Page 166)

166
Adding and Replacing Parts
NOTICE:
Do not disconnect the modem cable from the system board.
Replacing the Modem
1 Connect the modem cable to the modem.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors and realign the card.
2 Align the modem with the screw holes and press the modem into the
connector on the system board.
3 Install the screws to secure the modem to the system board.
1 system board connector 2 M2 x 3-mm screw
3 pull-tab 4 modem
5 modem cable
4 5
3
1
2
book.book Page 166 Wednesday, August 13, 2008 12:12 PM