Dell Precision M6300 (Late 2007) - Manual (Page 206)

206
Adding and Replacing Parts
Replacing the Video Card/Thermal-Cooling Assembly
1 Carefully align the video card/thermal-cooling assembly over the connector
on the system board and press down.
NOTE:
The video card/thermal-cooling assembly is labeled "PUSH HERE."
2 Tighten the four captive screws on the video card/thermal-cooling
assembly.
System Fan(s)
Removing the System Fan(s)
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
1 captive screws 2 video card/thermal-cooling assembly
3 system board connector
1
3
2
book.book Page 206 Wednesday, August 13, 2008 12:12 PM