Dell Precision M6300 (Late 2007) - Manual (Page 182)

182
Adding and Replacing Parts
Removing the Display Bezel
CAUTION:
Before you begin the following procedure, follow the safety
instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
1 Follow the instructions in "Before Working Inside Your Computer" on
page 156.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 176).
1 shoulder screws (4), two at the top
and two at the bottom) 2 screw covers (2)
3 M2.5 x 5-mm screws (4), one on each
corner) 4 rubber screw-covers/display
bumpers (6)
5 display bezel
3
5
4
1
2
book.book Page 182 Wednesday, August 13, 2008 12:12 PM