Crestron electronic One-Gang 802.11a/b/g Wireless Access Point CEN-WAP-ABG-1G - Manual (Page 10)

802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 Antenna Reverse SMA, female;
Connects to supplied antenna.
2 LAN (1) Green LED: Solid Green indicates link
status of the rear Ethernet port;
Flashing Green indicates Ethernet activity
through the rear Ethernet port.
3 Reset (1) Miniature push button that resets the
device.*
4 Wi-Fi (1) Green LED: Solid green indicates
wireless network connection;
Flashing green indicates wireless data
activity.
5 AMBER
LED
GREEN
LED
(1) 8-wire RJ-45 connector with 2 LED
indicators;
10BaseT/100BaseTX Ethernet port;
Amber LED indicates 100BaseT link status;
Solid Green LED indicates link status;
Flashing Green LED indicates Ethernet
activity.
Connects to local wired Ethernet equipment
(optional).
6 NETWORK PoE
NE
T
W
O
R
K
Po
E
(1) 8-wire RJ-45 connector;
10BaseT/100BaseTX Ethernet and PoE
input port;
Connects to IEEE 802.3af-compliant PoE
power source.
* To press the Reset button, use the end of a paper clip. Pressing the Reset button for eight seconds
resets the configuration settings of the unit to factory-default settings.
6 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B