Crestron electronic One-Gang 802.11a/b/g Wireless Access Point CEN-WAP-ABG-1G - Manual (Page 50)

802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
CEN-WAP-ABG-1G Troubleshooting (Continued)
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE ACTION
Errors exist with the
configuration of the
access point. Check that the operational
mode is set to WiFi Access
Point. For additional
information, refer to
“Configuring Operational
Mode” on page 19.
Check that the radio mode
(802.11a/b/g) is compatible
with the network device.
Check that the SSID
broadcast is enabled. For
additional information, refer to
“Configuring IEEE 802.11
Security Settings” on page 25. Wireless network
device cannot
connect to the
access point and
cannot see the
SSID.
Wireless device is not
within range of the
access point. Check that the wireless device
is within range of the access
point.
Wireless network
device cannot
connect to the
access point but
can see the SSID. Errors exist with the
configuration of the
access point. Check the security settings
and network key.
If MAC filtering is enabled,
check that the wireless device
is configured on the MAC filter
list. For additional information,
refer to “Configuring MAC
Filters” on page 29.
Reference Documents
The latest version of all documents mentioned within the guide can be obtained from
the Crestron website (
www.crestron.com/manuals ). This link will provide a list of
product manuals arranged in alphabetical order by model number.
List of Related Reference Documents
DOCUMENT TITLE
Best Practices for Installation and Setup of Crestron RF Products
Reference Guide
CEN-WAP-ABG-1G Wireless Access Point Quickstart Guide
Crestron e-Control Reference Guide
46 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B