Crestron electronic One-Gang 802.11a/b/g Wireless Access Point CEN-WAP-ABG-1G - Manual (Page 21)

Crestron CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point
Navigating Custom Settings Configuration Mode
Custom Settings configuration mode provides four main tabs: BASIC SETUP,
WIRELESS, ADMINISTRATION, and STATUS. The BASIC SETUP, WIRELESS, and
ADMINISTRATION tabs provide subtabs that allow access to configuration pages.
The STATUS tab provides subtabs that allow access to status pages. The following
illustration demonstrates the menu tree of Custom Settings configuration mode.
Custom Settings Menu Tree
Note the following:
• For information about configuration pages accessed from the BASIC
SETUP tab, refer to “Configuring Basic Setup Settings” on page 18.
• For information about configuration pages accessed from the WIRELESS
tab, refer to “Configuring Wireless Settings” on page 23.
• For information about configuration pages accessed from the
ADMINISTRATION tab, refer to “Configuring Administration Settings” on
page 33.
• For information about status pages accessed from the STATUS tab, refer to
“Viewing the Status of the Access Point” on page 38.
Saving/Canceling Configuration Changes
To save changes that you make to a configuration page, click Save settings at the
bottom of the page. If you do not wish to save your changes, click Cancel.
Save Settings and Cancel Buttons
NOTE: When you click Save settings, the access point saves the changes and
restarts to allow the changes to take effect. After 15-20 seconds, the “Bridge AP
Settings and Info” page opens to allow you to review the settings.
Operations & Installation Guide – DOC. 6695B 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G • 17