Crestron electronic One-Gang 802.11a/b/g Wireless Access Point CEN-WAP-ABG-1G - Manual (Page 42)

802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
Read-write community: In the text box, enter a text string that functions as a
password to allow the SNMP manager to read configuration settings from and write
configuration settings to the access point. The default setting is private. The read-
write community text string appears as solid black circles.
SNMP Trap Table: Add entries to the SNMP Trap Table to send notification events
from the access point to SNMP managers when a significant event occurs:
1. Click the checkbox to activate trap notification.
2. In the IP Address column, enter the IP address of the device to which the
access point is to send traps.
3. In the Community column, enter a read-only or read-write community text
string.
Viewing the Status of the Access Point
In addition to configuration of the access point, Custom Settings configuration mode
allows you to view and monitor operational status of the access point. The access
point displays the following information:
• A summary of configuration settings and general information
• The status of the wireless clients currently associated with the access point
• A log of system events
• A list of DHCP mappings
Viewing Summary Information To view a summary of current configuration settings and general information, click
the STATUS tab and then click the SUMMARY subtab. The “Bridge/AP Settings and
Info” page opens.
NOTE: If one or more configuration settings appear in red, the access point must
be restarted in order for the setting(s) to take effect. To restart the access point, press
Restart at the bottom of the screen. After 15-20 seconds, the “Bridge AP Settings
and Info” page opens again to allow you to review the settings.
NOTE: Since the “Bridge/AP Settings and Info” page displays the current settings
and status of the access point, you can save or print the page for future reference.
The following shows the general information displayed by the “Bridge/AP Settings
and Info” page.
“Bridge/AP Settings and Info” Page – General Information
38 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B