Crestron electronic One-Gang 802.11a/b/g Wireless Access Point CEN-WAP-ABG-1G - Manual (Page 7)

Crestron CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point
Specifications
Specifications for the CEN-WAP-ABG-1G are listed in the following table.
CEN-WAP-ABG-1G Specifications
SPECIFICATION DETAILS
RF Wireless
RF Transceiver IEEE 802.11a/b/g; 5.8 or 2.4 GHz 2-way RF;
64, 128, and 152-bit WEP encryption; WPA
and WAP2 with TKIP and AES
Transmit Power Up to 19 dBm
Range 30 feet (10 meters); range and speed vary
based upon environmental conditions
Ethernet 10BaseT/100BaseTX, auto-switching, auto-
negotiating, auto-discovery, full/half duplex,
TCP/IP, UDP/IP, DHCP client and server,
SNMP, IEEE 802.3u and 802.3af compliant
Power Requirements IEEE 802.3af Power over Ethernet, 3.3 W
(70 mA) @ 48 VDC
Environmental
Temperature 32º to 104º F (0º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 11 BTU/Hr
Enclosure Injection-molded plastic, white textured
finish, 1-gang mountable in a standard
plaster ring (recommended) or electrical box
(2.5 inch deep minimum), rack mountable
using a third-party rack mount panel*;
requires Decora faceplate (not included)
Dimensions (without antenna)
Height 4.14 in (10.51 cm)
Width 1.74 in (4.40 cm)
Depth 2.87 in (7.29 cm)
Weight 5 oz (133 g)
* Middle Atlantic HBL1-722243 or equivalent rack mount panel recommended. Note unit dimensions
when specifying any other rack mount kit.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Operations & Installation Guide – DOC. 6695B 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G • 3