Two Brothers Racing Can-Am Commander User Manual

V.a.l.e, Commander

Advertising
background image

V.A.L.E.

V a r i a b l e a x i s l o c k i n g e x h a u s t

TM

IMPORTANT - PLEASE READ CAREFULLY

Warranty

two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”

without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular

purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use

of these products or parts.

Installation Instructions

1.

Make sure the ATV is completely cool before starting
the installation. Make sure the ATV is secure on a level
surface and the parking brake is set.

2.

Remove the four bolts that attach the OEM muffler cover.
Remove muffler cover.

3.

Remove four springs that attach OEM muffler to header.

4.

Remove muffler mounting bolts, this may require tilting
the bed to access the nuts on the back side frame rail.

5.

Remove OEM muffler assembly.

6.

Remove one rubber grommet and sleeve, and both
lower grommets.

7.

Attach the three grommets to the TBR muffler.

8.

Install TBR muffler as shown.

9.

Attach supplied muffler hanger bracket using the 8x20mm
bolts and nuts that were provided for upper mounts. Use
the OEM bolt and nut with washer on lower mount. Tighten
hardware.

10. Loosely attach the two part X-ring using supplied bolts and

washers and lock tight.

2011 Can-am

Commander

V.A.L.E.™ Slip-on Exhaust System with M-7 Aluminum Canister
Part # 005-2960406V

We recommend that this performance part be installed by a qualified

motorcycle technician. If you have any doubts as to your ability to install this

performance part, please consult with your local motorcycle dealer. Read all

instructions first before starting installation. Make sure the motorcycle and

exhaust system are completely cool before starting the installation. Be sure

to save all stock components for possible use later.

**This product has not been tested with all available accessories and some

items may cause excessive heat. Excessive heat may cause damage to your

vehicle. Two Brothers Racing will not be responsible for damaged parts.

Advertising