Two Brothers Racing Can-Am Spyder - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
Parts List
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all
stock components for possible use later.
Installation Instructions
6. Install new TBR spacer in same location as previously
removed sleeve.
7. Place a bead of high temp silicone on inside edge of slip-
on tube where it will meet OEM header assembly.
8. Install TBR muffler assembly to machine.
9. Slide rubber lined muffler clamp over muffler and attach
using the supplied 10x75mm socket head cap screws
and OEM nut and washer.
10. Make sure everything is aligned and tighten
all hardware.
1. Make sure the bike is completely cool before starting the
installation. Make sure the bikes parking brake is set.
2. Remove OEM Muffler assembly.
3. Remove OEM Gasket.
4. Install slip-on tube to TBR muffler using the 6x14mm
socket head cap screws and lock washers provided,
leave loose for now.
5. Remove OEM spacer from mounting point.
2008 Can-Am
SPYDER 990
V.A.L.E.™ Slip-on Exhaust System with M-2 Canister
Part # 005-2290406V / 005-2290407V / 005-2290408V
Qty. Description Part Number
1 M-2 Muffler Canister Varies
1 Slip-On Tube 005-22901S
1 HARDWARE KIT 005-229-3
2 X-Ring (half) 005-7-2-3
1 Aluminum Spacer 005-229-S2
1 Muffler Clamp Varies
1 Rubber Clamp Liner 005-LC
1 Barrel Clamp 74mm 005-27-74M
1 10x75mm Socket Head Cap Screw 005-SH1075
4 6x14mm Socket Head Cap Screw 005-SH614
4 6mm Lock Washer 005-WL6
1 High Temp Silicon 013-P22072
1 5mm Long Handle Ball End Hex Key 005-9-18610
1 T20 Torx Short Hex Key 005-9-15820
1 Spring 005-S80
1 TBR Sticker Kit 015-10212
(Continued on page 2)
Muffler Inlet
X-Lite™ Ring
Slip Tube
V.A.L.E.™ Assembly Detail