Two Brothers Racing Can-Am Spyder Spyder RT User Manual
Page 6
Advertising
TBR001-283
www.twobros.com
10-11 Spyder RT
17 Attach the ground wire of the Juicebox Pro to the rear cylinder head on the left
side (Fig. K).
Remove the stock bolt and insert bolt thru the eyelet of the Juicebox Pro ground
wire and reinstall bolt into head.
18 Unplug the stock wiring harness from the front O2 sensor (Fig. L).
This connection is located on the left hand frame rail by the front cylinder
19 Plug the 4 pin connector labeled FRONT in-line of the stock O2 sensor and
wiring harness.
FIG
.K
FIG
.L
FIG
.M
20 Unplug the stock wiring harness from the rear O2 sensor (Fig. M).
This connection is located on the right side of the vehicle between the air box and
the coolant reserve bottle.
Advertising