Two Brothers Racing Can-Am Spyder Spyder RS - Manual (Page 5)

ITBR001-229 2008-10 CanAm Spyder - 5
Figur
e
G
Figur
e
H
Fi
gur
e I
unplug
harness
stock
connector
Juice Box Pro
connector
Juice Box Pro
connector
TPS sensor
posi-tap
10 Unplug the stock wiring harness from the front injector on the right side of the
throttle bodies as shown in Figure G.
To release the connector, squeeze the spring clip into the connector.
11 Attach the Juice Box Pro connectors with orange wires to the front injector and the
stock wiring harness as shown in Figure H.
12 Using the supplied posi-tap, attach the grey wire from
the Juice Box Pro to the white/brown wire of the stock
throttle position sensor (TPS) as shown in Figure I.
The TPS is located on the left side of the throttle
bodies.