Two Brothers Racing Polaris RZR-S - Manual (Page 3)

TBR001-185A www.twobros.com 2011 Polaris RZR 3
Figure
A
Figure B
Figure C
5. Attach the Juice Box Pro connectors to the injector harness and stock wiring
harness as shown in Figure B.
6. Locate the BLACK 3-pin throttle position sensor (TPS) connector as shown in
Figure C.
The TPS connector is located to the rear of the throttle body.
7. Unplug the TPS connector.
unplug
connector
unplug
unplug
connector
1. Remove both seats.
2. Remove the plastic panel behind the seats.
3. Locate the injector harness connectors as shown in Figure A.
The injector harness connectors are located next to the ignition coils.
4. Unplug the injector harness connectors.