Two Brothers Racing Polaris RZR-S - Manual (Page 4)

TBR001-185A www.twobros.com 2011 Polaris RZR 4
Figure D
Figure E
8. Attach the Juice Box Pro connectors to the TPS connector and wiring harness as
shown in Figure D.
9. Using one of the supplied zip ties, secure the connectors in place.
10. Remove the bolt securing the coil pack to the bracket as shown in Figure E.
11. Secure the ground wire from the Juice Box Pro to the bracket using the bolt
removed in step 10.
12. Using the supplied velcro, secure the Juice Box Pro to the panel behind the
drivers seat above the ECU as shown in Figure F.
Make sure to clean both surfaces with the alcohol swab before attaching.
Juice Box Pro
ground wire
Figure F
bolt