Two Brothers Racing Yamaha Super Tenere - Manual (Page 4)

ITBR001-312 www.twobros.com 2011-2012 Yamaha XTZ1200 - 4
11. Attach the Juice Box Pro harness to the stock wiring harness and each injector as
shown in Figure D.
Juice Box Pro orange wires connect to cylinder #1 (left).
12. Locate the stock O2 sensor connectors.
The stock O2 sensor connectors are on top of the battery and are hidden inside
the black rubber boots.
The clear connector is for the right O2 sensor. The black connector is for the left
O2 sensor.
13. Unplug the stock O2 connectors.
14. Attach the left and right labeled connectors from the Juice Box Pro harness to the
stock O2 sensor connections as shown in Figure F.
Attach the connector labeled left to the stock black connector.
Attach the connector labeled right to the stock clear connector.
15. Replace the fuel tank.
16. Replace the left and right side panels.
17. Replace the seat.
FIG
.D
FIG
.E
FIG
.F